6 Things to Check Before Submitting Your PCB Design for Manufacturing
Designing a printed circuit board is a long process; determining your performance specifications, researching components, pouring over datasheets to be sure they will fit your needs, and simulating your design. Once you’re satisfied with your design the last stage is production. We at Bittele Electronics do our best to make this as stress free as possible with our turnkey service. Just send us your design (in Gerber & centroid or ODB++) and Bill of Materials (BOM) and we will fabricate the board, order the parts and assemble. This way you do not need to source the parts yourself and deal with a separate manufacturer and assembler. To make this process even easier for you, here are some tips to check your design to avoid some common delays.
1. Do your Gerber Files load correctly?
If you are new to exporting your circuit designs for manufacturing, it is recommended that you double check the gerber files exported from your design program in a separate gerber file viewer. Bittele recommends the ViewMate free gerber viewer. Things to look for in your files include: do the files load in the viewer, are the trace widths as you intended, are the layers aligned, and any other variations from your design.
2. Do your traces meet your manufacturer’s requirements?
We at Bittele can manufacture a minimum trace width of 4 mils and a minimum trace spacing of 3 mils. These values increase with higher copper weights. You can double check these measurements in your gerber file viewer.
3. Do you have a layer for your board outline and are your components far enough from the board edge?
We at Bittele require a clearance of all components and traces to the board edge of 8 mils but for connectors or gold fingers required to be at the board’s edge please contact us to see if we can meet your needs. The benefit of the board outline layer is we are able to cut boards with any outline shape.
4. Did you include a centroid file for pick and place?
For automated assembly, a file is needed to instruct the machine where each component should be placed and in what orientation. More info on this file here. ODB++ includes this file automatically, but gerber files require this to be submitted separately.
5. Are your chosen parts available for order?
One of the most common delays in assembled PCB manufacturing is part availability. You can avoid this issue by checking your BOM availability using an online service such as Octopart and FindChips. Availability does fluctuate so do this right before you RFQ or place an order. If you have a specialty part in your design that is not available at popular distributors you may wish to purchase this part yourself and consign it for assembly.
6. Did you include a drill file?
A drill file specifies the location and size of holes drilled into your board. Some CAD software may require a separate step or option to export a drill file when generating gerber files. Double check that your drill file is included before submitting.
SMT Reflow Oven, Lead free Reflow Oven, Nitrogen SMT Reflow Oven, Reflow Oven Manufacturer, LED Reflow Oven, Dual Rail Reflow Oven, China Reflow Oven, Wave Soldering Machine, Dual Rail Wave Soldering Machine,Nitrogen Wave Soldering Machine, Wave Soldering Machine Manufacturer.
|FLASON provide a full SMT assembly line solutions, including
SMT Reflow Oven Manufacturer,
Wave Soldering Machine,
Pick and Place Machine,
SMT Stencil Printer,
SMT Inspection Machine,
SMT Reflow Oven,
SMT Peripheral Equipment,
SMT Assembly line,
SMT Spare Parts
etc any kind SMT machines you may need, please contact us for more information:
wechat whatsapp:+8613691605420, Skype: flasonsmt, Email: [email protected]
1) This is the first time I use this kind of machine, is it easy to operate?
There is English manual or guide video that show you how to use machine.
If you still have any question, please contact us by e-mail / skype/ phone /trademanager online service.
2) If machine have any problem after I receive it, how can I do ?
Free parts send to you in machine warranty period.
If the part is less than 0.5KG, we pay the postage.
If it exceeds 0.5KG, you need to pay the postage.
3) MOQ ?
1 set machine, mixed order is also welcomed.
4) How can I buy this machine from you? ( Very easy and flexible !)
A. Consult us about this product on line or by e-mail.
B. Negotiate and confirm the final price , shipping , payment methods and other terms.
C. Send you the proforma invoice and confirm your order.
D. Make the payment according to the method put on proforma invoice.
E. We prepare for your order in terms of the proforma invoice after confirming your full payment.
And 100% quality check before shipping.
F.Send your order by air or by sea.
5)Why choose us ?
A. Gold supplier on Alibaba !
B. Trade assurance to US$54,000 !
C. Best price !; Best shipping !; Best service !