Home > SMT Reflow Oven
Heller 1913 MK7 SMT Reflow Oven
Products description
Heller 1913 MK7 SMT Reflow Oven
The 1913 MK7 is a high volume reflow oven with 13 heated zones and belt speeds up to 1.88m/min. The 1913MK7 offers the lowest delta T’s, reduced nitrogen and electrical consumption and advanced flux management options.
Built-in Thermal Monitoring
Nitrogen Capable to < 100 ppm
Energy Management System
Virtually No Maintenance
10” Wide Heater Modules
Model
1913MK7 (Air)
1913MK7 (Nitrogen)
Electric Supply
Power Input (3 Phase) Standard
480 volts
480 volts
Breaker Size
100 amps @ 480v
100 amps @ 480v
kW
9 - 15 Continuous
9 - 15 Continuous
Typical Run Current
25 - 35 amps @ 480v
25 - 35 amps @ 480v
Optional Power Inputs Available
208/240/380/400/415/440/480 VAC
208/240/380/400/415/440/480 VAC
Frequency
50/60 Hz
50/60 Hz
Sequential Zone Turn On
S
S
Dimensions
Overall Oven Dimensions
232" (590cm) L x 60” (152cm) W x
232" (590cm) L x 60” (152cm) W x
Typical Net Weight
4898 lbs. (2220 kg)
5560 lbs. (2520 kg)
Typical Shipping Weight
6266 lbs. (2840 kg)
6928 lbs. (3140 kg)
Typical Shipping Dimension
620 x 185 x 185 cm
620 x 185 x 185 cm
Computer Control
AMD or Intel Based Computer
S
S
Flat Screen Monitor w/Mount
S
S
Windows Operating System
Windows 10 Home
Windows 10 Home
Auto Start Software
S
S
Data Logging
S
S
Password Protection
S
S
LAN Networking
O
O
Inert Atmosphere
Minimum PPM Oxygen
-
10-25 PPM*
Waterless Cooling w/ Flux
Separation System
-
O
Nitrogen On/Off Valve
-
O
Oxygen Monitoring System
-
O
Nitrogen Standby System
-
O
Typical Nitrogen Consumption
-
500 - 700 SCFH **
Additional Features
KIC Profiling Software
S
S
Signal Light Tower
S
S
Powered Hood Lift
S
S
Five (5)Thermocouple Profiling
S
S
Redundant Alarm Sensors
O
O
Intelligent Exhaust System
O
O
KIC Profiler / ECD Profiler
O
O
Center Board Support
O
O
Board Drop Sensor
O
O
Board Counter
O
O
Bar Code Reader
O
O
Custom Paint & Decal
O
O
Battery Backup for Conveyor and PC
O
O
GEM/SECS Interfacing
O
O
Mesh Belt Conveyor
Height From Floor
36.6" + 2.4" (93 cm + 6 cm)
36.6" + 2.4" (93 cm + 6 cm)
Maximum PCB Width
22" (56 cm)
22" (56 cm)
Space Required Between PCB's
0.0" (0.0 cm)
0.0" (0.0 cm)
Conveyor Length On-Load
18" (46 cm) *
3" (7.5 cm) *
Conveyor Length Off-Load
18" (46 cm) *
3" (7.5 cm) *
Heated Tunnel Length
140" (355 cm)
140" (355 cm)
Process Clearance Above Mesh Belt
2.3" (5.8 cm)
2.3" (5.8 cm)
Mesh Belt Pitch
0.5" (1.27 cm)
0.5" (1.27 cm)
Maximum Conveyor Speed
74"/Min (188 cm/min.)
74"/Min (188 cm/min.)
Conveyor Direction Left to Right
S
S
Conveyor Direction Right to Left
O
O
Conveyor Speed Control
Closed Loop
Closed Loop
Edge Hold Conveyor System Option
Height from Floor – Standard
37.8" ±2.4" (96 cm ± 6 cm)
37.8" ±2.4" (96 cm ± 6 cm)
Height from Floor – Optional
35.4" ± 2.4"
35.4" ± 2.4"
Clearance Above & Below Conveyor Pins
1.15" (2.9 cm)
1.15" (2.9 cm)
Length of PCB Support Pins
.187" (4.75 mm)
.187" (4.75 mm)
3 mm long support pins
O
O
Minimum/Maximum Board Width
2" – 22" (5 – 56 cm)
2" – 22" (5 – 56 cm)
Power Width Adjustment
S
S
Computer Controlled Width Adjust
O
O
Auto Lubrication System
S
S
Forced Convection Zones
Top & Bottom
13
13
Heater Type
Instant response open coil
Instant response open coil
Heater Material
Nichrome
Nichrome
Profile Change Time
5 – 15 minutes
5 - 15 minutes
Temperature Control
Accuracy of Temperature Controller
± .1°C
± .1°C
Cross-Belt Temperature Tolerance
±3.0°C
±3.0°C
Heater Wattage Per Zone
5400 w***
5400 w***
Temperature Range Standard
60-350°C
60-350°C
High Temperature Up to 450°C
O
O
Cooling Systems
Number of Cooling Zones Standard
3
3
Cooling zone Length
107cm
115cm
Additional Cooling Zones
O
O
Water Cooling
-
O
Notes:
S = Standard, O = Optional.
Keywords:
57” (144cm) H
57” (144cm) H
(90 cm ± 6 cm)
(90 cm ± 6 cm)
24” (61cm) Optional**
24” (61cm) Optional**
SMT Reflow Oven, Nitrogen Reflow Oven, Dual Lane Reflow Oven, Flason Electronic Co.,ltd provide a full SMT assembly line solutions, including SMT Reflow Oven, Wave Soldering Machine, Pick and Place Machine, SMT Stencil Printer, SMT AOI SPI Machine, SMT Reflow Oven, SMT Peripheral Equipment, SMT Assembly line, SMT Spare Parts etc any kind SMT machines you may need, please contact us for more information: wechat whatsapp:+8613691605420, Skype: flasonsmt, Email: tommy@flason-smt.com
Contact: Mr Tommy
Phone: +86 13691605420
Tel: +86 -755-85225569
Email: sales@flason-smt.com
Add: No.94,Guangtian Road,Songgang Street,Bao an District Shenzhen China