Minimum Drill Size and Drill Requirements
The smallest required or chosen diameter of holes to be drilled on a printed circuit board, as specified by the client’s files, is called the minimum drill size. Technical limitations in the manufacturing process, including plating and available drill bits, limit the minimum size a drilled hole can be through a PCB. At Bittele Electronics, our minimum drill hole diameter is 0.15mm for standard holes and 0.1mm for laser drilled holes. This means that we cannot manufacture boards with holes smaller than these sizes.
The leads of through hole components are always above the minimum drill size, thus only when choosing a size for your vias should the minimum drill size be considered. Most PCB designers should not need to worry about these minimums. However, if your design has a high density and you require the smallest possible via holes, then you may specify your holes down to our minimum size.
Another design parameter to consider is the aspect ratio of your holes. For thick boards with numerous layers or holes with very small diameters, there is a limit on the ratio between a hole’s depth and its diameter. At Bittele Electronics we permit a maximum aspect ratio of 10:1 for regular holes and 1:1 for laser drilling. This limitation is the reason why micro vias are drilled one layer at a time and cannot go through a multi-layer board in one drill.
One more specification to keep in mind when designing your board is the minimum clearance between your drilled holes and other copper features which it is not meant to connect to. This clearance varies based on the number of layers as follows:
Minimum clearance between the hole to other copper feature
1 (laser hole)
6.0mil preferred (5.0mil minimum)
8.0mil preferred (6.5mil minimum)
10.0mil preferred (7.0mil minimum)
12.0mil preferred (8.0mil minimum)
SMT Reflow Oven, Lead free Reflow Oven, Nitrogen SMT Reflow Oven, Reflow Oven Manufacturer, LED Reflow Oven, Dual Rail Reflow Oven, China Reflow Oven, Wave Soldering Machine, Dual Rail Wave Soldering Machine,Nitrogen Wave Soldering Machine, Wave Soldering Machine Manufacturer.
|FLASON provide a full SMT assembly line solutions, including
SMT Reflow Oven Manufacturer,
Wave Soldering Machine,
Pick and Place Machine,
SMT Stencil Printer,
SMT Inspection Machine,
SMT Reflow Oven,
SMT Peripheral Equipment,
SMT Assembly line,
SMT Spare Parts
etc any kind SMT machines you may need, please contact us for more information:
wechat whatsapp:+8613691605420, Skype: flasonsmt, Email: [email protected]
1) This is the first time I use this kind of machine, is it easy to operate?
There is English manual or guide video that show you how to use machine.
If you still have any question, please contact us by e-mail / skype/ phone /trademanager online service.
2) If machine have any problem after I receive it, how can I do ?
Free parts send to you in machine warranty period.
If the part is less than 0.5KG, we pay the postage.
If it exceeds 0.5KG, you need to pay the postage.
3) MOQ ?
1 set machine, mixed order is also welcomed.
4) How can I buy this machine from you? ( Very easy and flexible !)
A. Consult us about this product on line or by e-mail.
B. Negotiate and confirm the final price , shipping , payment methods and other terms.
C. Send you the proforma invoice and confirm your order.
D. Make the payment according to the method put on proforma invoice.
E. We prepare for your order in terms of the proforma invoice after confirming your full payment.
And 100% quality check before shipping.
F.Send your order by air or by sea.
5)Why choose us ?
A. Gold supplier on Alibaba !
B. Trade assurance to US$54,000 !
C. Best price !; Best shipping !; Best service !