Home > Panasonic Pick and Place Machine

Panasonic NPM WX WXS Pick and Place Machine

Max PCB:L 750 × W 610mm
Placing Speed: 86000CPH
Max Feeder: 136 reels
Weight: 2740kg
Product description: Panasonic NPM WX WXS Pick and Place Machine, Max PCB:L 750 × W 610mm, Placing Speed: 86000CPH, Max Feeder: 136 reels, Weight: 2740kg, W1410×D2570×H1444mm
INQUIRY

Panasonic NPM WX WXS Pick and Place Machine

Specifications:

Panasonic's next generation of mounting production (X series) concept
“Smart manufacturing"
More line throughput, better quality and lower cost with fully automated mounting system floor
Stable operation based on the autonomic function - Autonomous line control
APC system and automatic recovery option
Labor-saving, improved utilization - Concentrated control
Floor management system and remote operation option
Reduced work variations - Navigation/automated items
Feeder setup navigation, component supply navigation and automated items

Panasonic NPM-WX WXS Pick and Place Machine

Model ID		NPM-WX	NPM-WXS
Model No.		NM-EJM9D	NM-EJM2E
PCB dimensions (mm)	Single-lane mode	Batch mounting : L 50 × W 50 ~ L 750 × W 610 2-position mounting : L 50 × W 50 ~ L 350 × W 610
	Dual-lane mode	Dual transfer (Batch) : L 50 × W 50 ~ L 750 × W 300 Dual transfer (2-position) : L50 × W 50 ~ L 350 × W 300
		Single transfer (Batch) : L 50 × W 50 ~ L 750 × W 590 Single transfer (2-position) : L50 × W 50 ~ L 350 × W 590
Electric source		3-phase AC 200, 220, 380, 400, 420, 480 V 3.0 kVA	3-phase AC 200, 220, 380, 400, 420, 480 V 2.1 kVA
Pneumatic source *1		Min.0.5 MPa、200 L /min (A.N.R.)
Dimensions (mm)		W 1 410 2 × D 2 570 3 × H 1 444 *4
Mass		2 740 kg (Only for main body : This differs depending on the option configuration.)	2 660kg (Only for main body : This differs depending on the option configuration.)
Placement head		1 head on each side (front, rear)	1 head (rear camera is optional)
Component supply	Taping	Tape : 4 ~ 56 / 72 / 88 / 104 mm
		Front rear 17-slot feeder cart specifications : Max. 136 product types (4, 8mm tape)
	Stick	Front rear 17-slot feeder cart specifications : Max. 32 product types (single stick feeder)	Front rear 17-slot feeder cart specifications : Max. 16 product types *5 (single stick feeder)
	Tray	One side tray specifications : Max.24, Front-rear tray specifications : Max.48

Placement head	Lightweight 16-Nozzle head V2 (Per head)	Lightweight 8-nozzle head (Per head)	4-nozzle head (Per head)	3-nozzle head V2 (Per head)
Max. speed	43 000 cph (0.084 s / chip)	23 000 cph (0.155 s / chip)	8 400 cph (0.429 s / chip) 7 800 cph (0.462 s / QFP feeder) 7 100 cph (0.507 s / QFP tray) *8	9 400 cph (0.383 s / chip) 7 300 cph (0.493 s / QFP feeder) 6 350 cph (0.567 s / QFP tray) *9
Placement accuracy (Cpk≧1)	±25 μm/ chip	±25 μm/ chip ±40 μm/QFP □12 mm Under ±25 μm/QFP □12 mm ~ □32 mm	±20 μm/ QFP	±20 μm/ QFP
Component dimensions (mm)	0201 chip 67 / 03015 chip 6 0402 chip 6 ~ L 6 × W 6 × T 3	0402 chip *6 ~ L 45 × W 45 × T 12 or L 100 × W 40 × T 12	0603 chip ~ L 120 × W 90 × T 40 or L 150 × W 25 × T 40	0603 chip ~ L 120 × W 90 × T 40 or L 150 × W 25 × T 40

*1 : Only for main body
*2 : 2 010 mm in width if extension conveyors (300 mm) are placed on both sides.
*3 : Dimension D including feeder cart
*4 : Excluding the monitor, signal tower and ceiling fan cover.
*5 : Stick feeders cannot be used on the rear feeder cart of NPM-WXS.
*6 : 0201/03015/0402 component requires a specific nozzle/tape feeder.
*7 : 0201 component placement is optional. (Under conditions specified by Panasonic)
*8 : For any QFP □20 mm or less in size
*9 : For any QFP □28 mm or less in size
* Placement tact time and accuracy values may differ slightly depending on conditions.
* Please refer to the specification booklet for details.

Keywords:

JUKI RS-1R pick and place machine, JUKI RX-7R pick and place machine, Hanwha SM481 Plus Pick and Place Machine,SMT pick and place machine, JUKI Pick and place Machine, Samsung Pick and Place Machine, Yamaha Pick and Place Machine, Panasonic Pick and Place Machine, FUJI Pick and Place Machine, Siemens Pick and Place Machine.

Flason Electronic Co.,ltd provide a full SMT assembly line solutions, including SMT Reflow Oven, Wave Soldering Machine, Pick and Place Machine, SMT Stencil Printer, SMT AOI SPI Machine, SMT Reflow Oven, SMT Peripheral Equipment, SMT Assembly line, SMT Spare Parts etc any kind SMT machines you may need, please contact us for more information: wechat whatsapp:+8613691605420, Skype: flasonsmt, Email: tommy@flason-smt.com

FAQ
1) This is the first time I use this kind of machine, is it easy to operate?
There is English manual or guide video that show you how to use machine.
If you still have any question, please contact us by e-mail / skype/ phone /trademanager online service.
2) If machine have any problem after I receive it, how can I do ?
Free parts send to you in machine warranty period.
If the part is less than 0.5KG, we pay the postage.
If it exceeds 0.5KG, you need to pay the postage.
3) MOQ ?
1 set machine, mixed order is also welcomed.
4) How can I buy this machine from you? ( Very easy and flexible !)
A. Consult us about this product on line or by e-mail.
B. Negotiate and confirm the final price , shipping , payment methods and other terms.
C. Send you the proforma invoice and confirm your order.
D. Make the payment according to the method put on proforma invoice.
E. We prepare for your order in terms of the proforma invoice after confirming your full payment.
And 100% quality check before shipping.
F.Send your order by air or by sea.
5)Why choose us ?
A. Gold supplier on Alibaba !
B. Trade assurance to US$54,000 !
C. Best price & Best shipping & Best service !